Association crafter approach with technology: Customized product design with 3d printer
Article Sidebar
Main Article Content
Abstract
Before the industrial revolution, production had been taking place on the basis of craft, products had been designing and producing specifically to people. İn time, diversifying and expanding consumer needs had led to the evolution of mechanical production to the production of hand. The mass production associated with the industrial revolution had made it possible to produce many of the same products and cheaply. Initially ,this new mode of production maked easier to be able to access the objects but eventually human beings covered with surrounding objects had led to emergance concept of “man-made world†and began to look for new ways to get rid of the uniformity of mass production. This quest had emerged the concept of "mass customization". Companies wishing to increase user satisfaction began to offer personalized services and products to users. However, this can be done within certain boundaries in the traditional manufacturing approach. Today, 3D printer, which is a revolution in the production technology, a new way to produce Customizing products. It becomes possible to produce custom designed products just a craftsman with sensitivity quickly. This study aims to investigate the relationship between 3d printer with customization and detection future application areas.
Â
Keywords: Product design, 3d  printer, Mass  production, Customization
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
Cox, E. , Bebbington, J. (2015). Craft and Sustainable Development: An Investigation. Retriewed from https://www.st-andrews.ac.uk/media/sasi/documents/Craft%20and%20Sustainable%20Development.pdf
Acher, M., Baudry, B., Barais, O., & Jézéquel, J. M. (2014). Customization and 3D printing: a challenging playground for software product lines. In Proceedings of the 18th International Software Product Line Conference (pp. 142-146). ACM.
Akgeyik, T., (1998), Stratejik Üretim Yönetimi. İstanbul, Sistem.
Agrawal, R. K., & Hurriyet, H. (2004). The advent of manufacturing technology and its implications for the development of the value chain. International Journal of Physical Distribution & Logistics Management, 34(3/4), 319-336.
Bardakçı, A. (2004). Kitlesel Bireyselleştirme Uygulama Yöntemleri , Akdeniz İ.İ.B.F. Dergisi, 4(8), 1-17.
Barnat, C.(2013). 3-D printing: The next industrial revolution. CreateSpace.
Berman, B.(2012). 3-D printing: The new industrial revolution. Business Horizons, 55(2), 155- 162.
Bıçakçı, İ. (2008). Sanayi Toplumundan Bilgi Toplumuna Tüketimin Evrimi ve Türkiye’deki Yansımaları. International Journal of Human Sciences, 5(01).
Çetin, O, (2006). Çevik Üretim ve Karşılaştırmalı bir Araştırma. Yüksek Lisans Tezi, Trakya Üniversitesi, Edirne.
Doğan, E., T. (2012). Zanaatkarlığın Günümüzde Yeniden Yorumlanması: Yeni Zanaatkarlık mı?. Çalışma İlişkileri Dergisi, 3(1), 67-85.
Ekmekçioğlu, D, (2012). Bir Meslek İki Farklı profil: Türkiye’De Endsütriyel Tasarım Eğitimindeki Farklı Öğrenci Kabul Sistemleri ve Yansımaları. Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, İstanbul.
Gersil, A. (2007). Üretim Sistemleri ve Teknolojilerindeki Gelişmelerin ve Küreselleşmenin Geleneksel Maliyet Muhasebesine Etkileri. Ankara Üniversitesi SBF Dergisi, 62(04), 107-123.
Karaca, M., K. (1996). Montaj Hatları . Süleyman Demirel Üniversitesi İ.İ.B.F. Dergisi, 01(01), 117-128.
Pine, J. (1993). Mass Customization: The New Frontier in Business Competition, Boston: Harvard Business Press.
Prince, J. D. (2014). 3D printing: An industrial revolution. Journal of Electronic Resources in Medical Libraries, 11(1), 39-45.
Sennett, R. (2013). Zanaatkar . Melih Pekdemir, (Çev.), İstanbul: Ayrıntı.
Da Silveira, G., Borenstein, D., & Fogliatto, F. S. (2001). Mass customization: Literature review and research directions. International journal of production economics, 72(1), 1-13.
Soyuer, H. (2005). Kitlesel Kişiye Özel Üretimde Modüler Üretim Anlayışı. In Proceedings of the V. Ulusal Üretim Araştırmaları Sempozyumu (pp.177-180). İstanbul: İstanbul Ticaret Üniversitesi.
Yılmaz, F. , Arar, M. E., and Koç, E. (2014). 3D Baskı ile Hızlı Prototip ve Son Ürün Üretimi. Metalurji dergisi, 168, 35-40.